LAB 1.7

   IDENTITY AND USER MANAGEMENT

On this occasion I will make the steps of Identity and User Management,

Well watched, friends.

1. The first step is to open the mikrotik terminal then enter the login "admin" and the password you just blank then you click enter.

2. Then you Ctrl+C and Ctrl+L to delete, if you have typed "ip address pr" then enter.

3. After that you type "ping 8.8.8.8" then enter, and type "ping google.com".

4. Next you type system identity set name=R1-TKJ, then you click enter and you type

user pr and you click enter again.

5. Then you type "user group pr"

6. Next, type "user pr" then click enter.

7. After that, type "user add name = sazkia group = full password = sazkia", then click enter.

8. Then you type "user pr" then click enter.

9. After that, type "logout" to log out, then click enter, then press Ctrl+D.

10. Then you enter the login again "sazkia" then the password "sazkia" or it must match the username, then enter, then you Ctrl+C and Ctrl+L to delete the command.

11. Then you type "ip address pr" then enter.

12. Next, type "ip address add address=192.168.1.1/24 interface=ether4" then enter.

13. Then we check the ip address pr, then you enter.

14. Next, type "user add name=kia-read password=kia group=read" then enter.

15. Then type "user pr" then enter.

16. Next, press Ctrl+D, then enter the login with "kia-read" and the password "kia", then enter.

17. After you enter, you Ctrl+L to delete the command, then you type 

"ip address pr" then you enter.

18. Then you type "ip address add address=10.10.10.1/24 interface=ether5" then enter,

After that, type "user add name=yaya password=yaya group=full, then enter.

19. After that, press Ctrl+D, then enter the login with "sazkia" and the password "sazkia", then enter.

20. Next, if you have entered, press Ctrl+L to delete the command, then type "user pr" and then press enter.

21. Then you type "user add name=rapli-write password=rapli group=write, then enter, 

then you type "user pr".

22. After that, press Ctrl+D, then fill in the login with "rapli-write" then the password "rapli", then enter.

23. Next, you enter, you Ctrl+L to delete the command, then you type 

"ip address pr" then you enter, and you type "ip address add address=10.10.10.1/24 interface=ether5, then you enter.

24. Then you type "ip address pr" then enter, after that you type

 "user add name=kiki password=kiki group=full", then you enter.

25. Next, press Ctrl+D, then enter the login with "sazkia" and the password "sazkia", then enter.

26. Then, if you have entered, press Ctrl+L to delete the command, then type 

"ip address pr" then you enter, and you type "user pr", then you enter.

27. Then you type "user add name=serli password=serli group=full address=172.16.2.20/24"

then enter.

28. Next, type again, 

"user add name=serli password=serli group=full address=172.16.2.20" lalu enter.

29. Then we check "user pr" then enter.

30. Then we open Winbox then you log in using "admin" and you don't need to enter the password.

You fill it in, then you click "connect" because we only want to check whether logging in using the admin is possible or not.

31. Next we will log in based on "sazkia", the way to do this is by clicking "new winbox"

then you click connect.

32. Then, after you have successfully entered the page, the first step is to click "system"

then select "users" then a display like this will appear.

33. After that, you log in using "serli" and the password "serli" then click "connect".

34. Finally, after you click connect, the result will be an error, why an error? Because here

The one who restored it was the user "serli" from the address 20 

(not connected to the network).

  

The following are the steps for Identity and User Management, I apologize if there are any errors or shortcomings in the tutorial I made.

HOPE THIS IS USEFUL, FRIENDS!